Ford E-450 2023 Fuse Box Info
Passenger compartment fuse box location:
The fuse box is located to the left of the brake pedal and mounted onto the lower left cowl panel.
Engine compartment fuse box location:
The power distribution box is located in the engine compartment.
Fuse Box Diagram | Layout
Passenger compartment fuse box:
Fuse/Relay N° | Rating | Functions |
1 | - | Not used |
2 | 10A | Left-hand front and right-hand front door lock switch (cutaway), Inverter (cutaway), Connector (stripped chassis) |
3 |
7.5A - |
Power mirror switch (cutaway) Not used (stripped chassis) |
4 | 20A | Not used (spare) |
5 | 20A | Not used (spare) |
6 | 10A | Not used (spare) |
7 | 10A | Not used (spare) |
8 | 10A | Not used (spare) |
9 | 10A | Not used (spare) |
10 | - | Not used |
11 | - | Not used |
12 | 7.5A | Smart datalink connector |
13 | 7.5A | Cluster, Steering column control module |
14 | 15A | Not used (spare) |
15 | 15A | Not used (spare) |
16 | - | Not used |
17 | 7.5A | Not used |
18 | 7.5A | R/S feed for Front blend actuator/climate mode switch (cutaway), R/S feed to strip chassis connector (stripped chassis) |
19 | 5A | Radio transceiver module and telematics control unit, Telematics control unit |
20 | 5A | Ignition switch |
21 | 5A | Not used |
22 |
5A 5A |
Body builder B-pillar connector (cutaway) Not used (stripped chassis) |
23 | 30A | Not used (spare) |
24 | 30A | Not used (spare) |
25 | 20A | Not used (spare) |
26 | 30A | Not used (spare) |
27 | 30A | Not used (spare) |
28 | 30A | Not used (spare) |
29 |
15A - |
Upfitter interface module (cutaway) Not used (stripped chassis) |
30 | 5A | Not used (spare) |
31 | 10A | Smart datalink connector |
32 | 20A | Radio (cutaway) |
33 | - | Not used |
34 | 30A | Not used (spare) |
35 | 5A | Tow haul switch |
36 |
15A - |
Rear view mirror (cutaway), Camera lane departure (cutaway) Not used (stripped chassis) |
37 | 20A | Not used (spare) |
38 |
30A - |
Rear window switches and motors (cutaway) Not used (stripped chassis) |
Engine compartment fuse box:
Fuse/Relay N° | Rating | Functions |
1 | 20A | Horn |
2 | 50A | Blower motor |
3 | - | Not used |
4 | 30A | Starter relay |
5 | - | Not used |
6 | 20A | Upfitter relay 4 (cutaway), Not used (spare) (stripped chassis) |
8 | - | Not used |
10 | - | Not used |
12 | 20A | Power point 4 |
13 | 10A | Yaw sensor (stripped chassis), Not used (spare) (cutaway) |
14 | 10A | Forward looking radar (cutaway), Not used (spare) (stripped chassis) |
15 | - | Not used |
16 | - | Not used |
17 | 10A | Powertrain control module run/start feed |
18 | 10A | Anti-lock brake system run/start feed |
19 | - | Not used |
20 | 30A | Wiper power |
21 | - | Not used |
22 | 10A | Wiper module (stripped chassis), Not used (spare) (cutaway) |
23 | - | Not used |
24 | 40A | Body control module - run power in feed 2 |
25 | 50A | Body control module - run power in feed 1 |
26 | - | Not used |
27 | 20A | Body builder frame connector |
28 | - | Not used |
29 | 10A | B+ power 12 V(special order vehicle) |
30 | 30A | Power driver seat (cutaway), Not used (spare) (stripped chassis) |
31 | - | Not used |
32 | 20A | Vehicle power 1 |
33 | 20A | Vehicle power 2 |
34 | 10A | Vehicle power 3 |
35 | 20A | Vehicle power 4 |
36 | - | Not used |
37 | - | Not used |
38 | 10A | Washer relay (stripped chassis), Not used (spare) (cutaway) |
39 | - | Not used |
41 | 30A | Trailer brake control connector |
43 | 30A | Instrument panel connector (stripped chassis), Not used (spare) (cutaway) |
45 | - | Not used |
46 | 10A | A/C clutch |
47 | 40A | Upfitter relay 1 (cutaway), Not used (spare) (stripped chassis) |
48 | - | Not used |
49 | 30A | Pump electronics module |
50 | 15A | Fuel injectors |
51 | 20A | Power point 1 |
52 | 50A | Power at all times (PAAT) Aux AC prep on B-pillar vehicle connector (cutaway), Not used (spare) (stripped chassis) |
53 | 30A | Trailer tow park lamps |
54 | 40A | R/S feed on instrument panel connector |
55 | 20A | Upfitter 3 relay (cutaway), Not used (spare) (stripped chassis) |
56 | 20A | Power point 2 prep B-pillar connector |
58 | 5A | USB smart charger |
59 | 10A | Park lamps 1 (special order vehicle) |
60 | - | Not used |
61 | - | Not used |
62 | - | Not used |
63 | - | Not used |
64 | - | Not used |
65 | - | Not used |
66 | - | Not used |
67 | - | Not used |
69 | - | Not used |
70 | 40A | Inverter |
71 | 30A | Anti-lock brake system valves |
72 | 10A | Brake on and off switch |
73 | - | Not used |
74 | - | Not used |
75 | - | Not used |
76 | 60A | Anti-lock brake system pump |
77 | 30A | Voltage quality module power - body control module |
78 | 10A | Trailer tow stop lamps |
79 | - | Not used |
80 | 10A | Trailer tow backup lamps |
81 | - | Not used |
82 | 5A | Upfitter switch (factory location for ignition power) |
83 | 5A | Upfitter switch (optional location for power at all times) |
84 | - | Not used |
85 | - | Not used |
86 | - | Not used |
87 | - | Not used |
88 | - | Not used |
89 | - | Not used |
91 | 40A | Hot at all times (HAAT) / B+PWR on B-pillar connector (cutaway), Battery power on instrument panel connector(stripped chassis) |
93 | 10A | Park lamps 3 (special order vehicle) |
94 | 10A | Park lamps 2 (special order vehicle) |
95 | 20A | Stop lamp relay |
96 | - | Not used |
97 | 50A | Battery power to Engine, Bpillar and instrument panel vehicle connectors |
98 | 30A | Trailer tow battery charge |
99 | 40A | Upfitter 2 relay (cutaway), Not used (spare) (stripped chassis) |
100 | - | Not used |
101 | - | Not used |
102 | - | Not used |
103 | - | Not used |
104 | - | Not used |
105 | 15A | Trailer tow right-hand and left-hand stop and direction indicator relay power |