Dodge Viper 2017 Fuse Box Info
Engine compartment fuse box location:
Fuse Box Diagram | Layout
Engine compartment fuse box:
| Fuse/Relay N° | Rating | Functions |
| 3 | 40A | Rad Fan |
| 4 | 40A | Rad Fan Rly High |
| 5 | 40A | ABS/ESP Pump Feed |
| 6 | 40A | Starter |
| 7 | 40A | CBC (Ext. Lighting #1) |
| 8 | 40A | CBC (Ext. Lighting #2) |
| 9 | 30A | CBC (Lighting, Washer Pump) |
| 10 | 30A | CBC (Power Lock) |
| 11 | - | B+ Jumper |
| 12 | 25A | ABS/ESP Valve Feed |
| 13 | 20A | Horn |
| 14 | 10A | A/C Clutch |
| 15 | 10A | Diagnostic, Fuel Door, Stop Switch |
| 16 | 15A | KIN, RF Hub |
| 17 | 25A | Power Seats |
| 18 | 30A | Driver Door Mod |
| 19 | 30A | Passenger Door Mod |
| 20 | 30A | Rear Window Defroster |
| 21 | 20A | Wiper |
| 22 | - | B+ Jumper |
| 23 | 15A | HVAC MOD, Cluster, ICS-Switch Bank |
| 24 | 25A | PCM- Powertrain Control Module |
| 25 | 25A | Fuel Pump |
| 26 | 20A | ASD #1 |
| 27 | 20A | ASD #2 |
| 28 | - | Not Used |
| 29 | 40A | HVAC Blower |
| 30 | 20A | RR Power Outlet, Adj. Pedals, UCI |
| 31 | - | B+ Jumper |
| 32 | - | Not Used |
| 33 | 20A | Run Acc relay |
| 34 | - | B+ Jumper |
| 35 | - | Not Used |
| 36 | 10A | ORC Mod Run |
| 37 | 15A | Cluster, Camera |
| 38 | 20A | Active Damping Suspension |
| 39 | 10A | HVAC Module, In Vehicle Temp, Blower Relay |
| 40 | - | Not Used |
| 41 | - | Run/Start |
| 42 | - | Fuel Door |
| 43AC (Forward Fuse) | 2A | SCCM |
| 43BE (Rearward Fuse) | 10A | Tire Pressure Module |
| 44AC (Forward Fuse | 10A | Rear View Mirror, Aux Port Jumper |
| 44BE (Rearward Fuse) | 10A | Intelligent Battery Sensor |
| 45 | 10A | PCM- Powertrain Control Module, Fuel Pump Relay |
| 46 | 10A | ESC Module, Stop Lamp Switch |
| 47 | 10A | ORC Module, Passenger Seat OCM |
| 48 | 10A | SCCM |
| 49 | 25A | Amplifier |
| 50 | - | Rad Fan |
| 51 | - | Rad Fan Relay SER/PAR |
| 52 | - | Starter Relay |
| 53 | - | Rear Window Defroster Relay |
| 54 | - | Rad Fan Relay High |
| 55 | - | Wiper ON/OFF |
| 56 | - | Wiper LO/HI |
| 57 | - | Horn Relay |
| 58 | - | A/C Clutch Relay |
| 59 | - | HVAC Blower |
| 60 | - | Fuel Pump |
| 61 | - | Run Relay #1 |
| 62 | - | Run Relay #2 |
| 63 | - | ASD #1 |
| 64 | - | ASD #2 |
| 65 | - | Run Accy #1, Pop Up, Driver Door Window Switch |
| 66 | - | Not Used |
| NOTE: | A 15A fuse for the radio system is located in-line at the battery positive terminal. |
